Bally / Stern Power Rectifier Connector Repair Kit

Description

Bally / Stern Power Rectifier Connector Repair Kit

Another quality RTBB Kit !

Replace the commonly burnt out J1, J2 & J3 Connector Housing, Headers and pins.

There are two versions to select from the pull-down list;

Standard “Rectifier Connector Kit” (Without Headers)

1 X Molex 9 Pin Housing
1 X Molex 10 Pin Housing
1 X Molex 20 Pin Housing
3 X Molex Polarizing Keys
4 X PCB Standoffs
40 X Molex 0.156 Trifurcon Crimps 18-20 AWG

Additional “Rectifier Header Kit” (With Headers)

1 X Molex 9 Pin Header
1 X Molex 10 Pin Header
1 X Molex 20 Pin Header

From years of experience repairing these boards, we suggest the replacement of BOTH the Connector Housing AND Headers. I almost every board we have seen, the 4 X Standoffs need to be replaced due to broken tabs. So while the board is being worked on – these can be replaced.

The Trifurcon Crimps are an upgrade to the Standard Crimps. The 18-20 AWG Cramps can be used on both wire sizes, but the Crimping tool for the AWG 22-26 are harder to source. So we use the 18-20 AWG Size.

We have the Crimping Tool Here – Crimping Tool For Molex 0.100″ & 0.156″ Terminals – SN-58B – RTBB

Please Note – These are Genuine Molex Components, not cheap copies. We use these exact components and tools in house.